SpiderPaint v2c qt2

GMIC QT 2.0x
will not run on older versions, 


Quick explaination of commands

Process size does not  resize the output.  Only for processing.
A higher process size gives a tighter 'webbing'
A lower process size gives a looser webbing.

Intensity -- not normally needed.  Controls #loops when
                 building layers.  You can experiment.

Command String has changed with additions.

The commands are not case sensitive. Y or y, X or x all ok.
----------------------------------------------------------------------------------------
1st Position  -- control layer creation
----------------------------------------------------------------------------------------
Y = Yes create this layer.
F = Create this layer and let it cover the entire image.
N = No, don't create this layer.
the F option is available only on layers 2,3, and 4.
The Sparkle layer is always F if you choose to use it.
Note:  Layer One is used for the stitched background so, 
           if 1 is set N and stitched background is selected, 
          you will get layer 1 in the output stack also.
----------------------------------------------------------------------------------------
     Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
2nd position -- color options for the layer
----------------------------------------------------------------------------------------
0 = Normal (Plain) color
1 = Boost color
2 = Desaturate color
3 = Remove White
4 = Super Boost color
----------------------------------------------------------------------------------------
     Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
3rd position -- choice of Solidify  preset 1 - 35
----------------------------------------------------------------------------------------
Version 2c QT2 has 15 added Solidfy presets to experiment with
----------------------------------------------------------------------------------------
     Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
4th Position is Scale % for processing the layer.  up to 200%
----------------------------------------------------------------------------------------
      Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
5th Position is Noise setting .00 to 20.   
----------------------------------------------------------------------------------------
      Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
6th Position is Segment Length setting .50 to 15
----------------------------------------------------------------------------------------
      Always separate the commands with an X or x as delimiter
----------------------------------------------------------------------------------------
7th Position is Morph amount 0 - 10
----------------------------------------------------------------------------------------
Added 
Options to Smokey Borders layers
All=Light and Dark layers, Light or Dark -- all same as before 2 each.
Thick (set of 3), Medium (set of 3) and Thin(set of 3) -- all new, all dark
Thick sets also include light smokey border and subject & dark subject.
----------------------------------------------------------------------------------------
Added
More options on the 'Stitched background' 
----------------------------------------------------------------------------------------
Bubble Background - a Max Boost for color was added.
----------------------------------------------------------------------------------------
You must use an image with alpha and transparency.  Even if the
transparency is a 1 pixel eraser in a corner.
If you are using a 'full' image with just a nick of transparency -
you may as well select N to all background layers - they will have nothing
to work on and will just take up time.
You could use F on 2,3 and 4 though.
---------------------------------------------------------------------------------------
As is normal for me, this script produces a layer stack for you to 
experiment with and personalize the outcome.
==================================================
